IGI 6006 Paraffin/Soy Container Wax

IGI 6006 is a paraffin-soy blend designed for container candles. It is popular with candle makers who want a smoother surface, strong hot throw, good jar adhesion, and easier one-pour results compared with many pure soy waxes.

This wax has a soft slab texture and a creamy opaque finish. Final results depend on your fragrance oil, wick, container size, dye, room temperature, and cure time.

• Paraffin-soy blend for container candles
• Good choice for jars, tins, and tealights
• Strong hot throw potential
• Smooth opaque semi-gloss appearance
• Low shrinkage compared with many straight waxes
• Usually easier to work with than many pure soy container waxes

1. Cut or break the soft slab into smaller pieces.
2. Melt wax until fully liquid.
3. Add fragrance oil at your tested fragrance-add temperature.
4. Stir slowly and evenly for about 1–2 minutes.
5. Pour into a prepared jar, tin, or tealight cup.
6. Allow the candle to cool fully before burn testing.

A common fragrance load range for IGI 6006 is 6–10%. This wax is known for strong scent throw, but more fragrance oil is not always better. Too much oil can cause sweating, poor burn quality, unstable flame, or surface issues.

CD and ECO wick series are common starting points, but wick size must be tested with your exact jar, fragrance oil, dye, and fragrance load.

IGI 6006 is easier to work with than many soy waxes, but it still needs formula testing. Surface dips, wet spots, sweating, weak scent throw, or wick problems can happen if temperature, fragrance load, or wick size is off.

• Surface dip: Test a slightly hotter pour or use a heat gun for minor surface correction.
• Wet spots: Warm jars slightly and avoid fast cooling.
• Sweating: Lower fragrance load or test a different fragrance oil.
• Weak scent throw: Test cure time, fragrance load, and wick size.
• Large flame: Wick down and retest before selling finished candles.
• Small flame: Wick up or reduce fragrance load if the candle is struggling to burn.

Store wax in a cool, dry place away from direct sunlight, heat, moisture, and strong odors.

IGI 6006 is a soft slab wax and may soften during hot-weather shipping. This usually does not damage the wax. Let the wax return to room temperature before cutting, weighing, or melting.

Is IGI 6006 beginner-friendly?
Yes. IGI 6006 is one of the easier container waxes for beginners because it usually gives smoother tops, good scent throw, and easier one-pour results than many pure soy waxes.

What is IGI 6006 best used for?
It is best used for container candles, including glass jars, candle tins, and tealights.

Is IGI 6006 a soy wax?
No. It is a paraffin-soy blend. It contains soy, but it should not be marketed as a pure soy wax.

Is IGI 6006 better than GB 464?
Not automatically. IGI 6006 usually gives stronger hot throw and smoother tops because it contains paraffin. GB 464 is a better fit if you want a soy-based container wax. Choose based on your brand positioning and burn tests.

Is IGI 6006 a single-pour wax?
It often works well as a single-pour container wax, but this is not guaranteed. Large jars, cold rooms, heavy fragrance loads, or fast cooling can still cause dips or surface issues.

Can I use IGI 6006 for molds or pillar candles?
No. IGI 6006 is a soft container wax. For molds, pillars, or freestanding candles, use a pillar wax.

Can I use this wax for wax melts?
It is mainly designed for container candles. For wax melts, use a tart or melt wax for better hardness and release.

How long should candles cure?
Many makers test IGI 6006 after several days of curing. Longer cure time may improve fragrance performance depending on your fragrance oil and formula.