BB-C83 Coconut Container Wax

BB-C83 Coconut Container Wax is a soft coconut-based slab wax made specifically for container candle applications.

Its soft texture and low-shrink profile make it useful for glass jars, candle tins, tealights, and other heat-safe candle vessels.

BB-C83 can produce a smooth, creamy-looking candle surface and good glass adhesion, but final results depend on fragrance oil, wick selection, vessel size, production temperature, room conditions, and cooling speed.

Because this is a soft container wax, it is not intended for freestanding pillar candles or molded candles.

• Coconut-based wax for container candle making
• Soft slab form for easy cutting and portioning
• Creamy off-white appearance
• Low-shrink characteristics
• Suitable for clear glass jars and candle tins
• Can produce smooth tops when properly tested
• Suitable for scented or unscented container candles

1. Cut or break the soft wax slab into smaller pieces.
2. Weigh the amount required for your candle batch.
3. Melt the wax until completely liquid.
4. Add fragrance oil at your tested fragrance-add temperature.
5. Stir slowly and evenly until the fragrance is fully incorporated.
6. Pour into a clean, prepared jar, tin, or tealight container.
7. Leave the candle undisturbed while cooling.
8. Allow the candle to cool completely before final testing.
9. Allow adequate cure time before evaluating scent and burn performance.

A typical fragrance testing range for BB-C83 is approximately 8–10%.

Do not automatically use the maximum fragrance amount. Some fragrance oils perform better at lower percentages, while excessive fragrance can contribute to sweating, wick problems, weak combustion, or poor surface appearance.

CD wicks can be used as a starting point, but the correct wick depends on vessel diameter, fragrance oil, fragrance percentage, dye, and the complete candle formula.

BB-C83 is a soft container wax, so vessel preparation and cooling conditions can strongly affect the finished appearance.

• Containers: Use clean, dry, heat-safe candle vessels.
• Cold jars: Avoid pouring into extremely cold containers.
• Drafts: Keep cooling candles away from fans and strong air movement.
• Cooling: Avoid sudden temperature changes.
• Glass adhesion: Vessel temperature and cooling speed can affect adhesion.
• Testing: Record your process so successful results can be repeated.

BB-C83 and traditional soy container waxes can both be used for jar candles, but they do not behave exactly the same.

• BB-C83: Soft coconut-based container wax with a creamy appearance and low-shrink profile.
• Golden Wax 464 / 444: Soy-based container waxes with different hardness, cooling behavior, and wick requirements.
• Cargill C-3: Soy container wax with its own adhesion, surface, and fragrance characteristics.
• IGI 6006: Paraffin-soy blend rather than a coconut-based wax.

Choose the wax based on your vessel, fragrance oil, desired appearance, and burn-test results rather than wax type alone.

• Sweating: Reduce fragrance load or test a different fragrance oil.
• Wet spots: Review jar temperature and cooling conditions.
• Sinkholes: Test pour temperature and slower cooling conditions.
• Uneven surface: Review pour temperature, fragrance level, and cooling speed.
• Weak scent throw: Test fragrance compatibility, fragrance percentage, cure time, and wick size.
• Large flame: Wick down and complete another full burn test.
• Small flame: Test a larger wick or review fragrance and dye levels.
• Uneven melt pool: Check wick centering, vessel diameter, and wick selection.

Store BB-C83 in a cool, dry place away from direct sunlight, excessive heat, moisture, dust, and strong odors.

Because BB-C83 is a soft coconut-based slab wax, it may soften, stick together, or show surface marks during warm-weather shipping.

This normally does not prevent the wax from being melted and used. Allow it to return to room temperature before cutting, weighing, or melting.

What is BB-C83 best used for?
BB-C83 is designed for container candles, including glass jars, candle tins, tealights, and other suitable candle vessels.

Is BB-C83 pure coconut wax?
It is better described as a coconut-based container wax. Do not assume it is 100% coconut unless supplier documentation specifically confirms that claim.

Can I use BB-C83 for jar candles?
Yes. Jar candles are one of its primary applications.

Can I use BB-C83 in candle tins?
Yes. Use a suitable heat-safe candle tin and test the wick with the exact formula.

Can I use BB-C83 for pillar candles?
No. BB-C83 is a soft container wax and is not intended for freestanding candles.

Can I use BB-C83 for silicone molds?
It is not recommended as a primary mold wax because it is too soft for most freestanding molded candle applications.

Can I use BB-C83 for wax melts?
A dedicated wax melt or tart wax is a better choice when firmness and mold release are important.

How much fragrance oil should I use?
A common testing range is approximately 8–10%. Start below the maximum and increase only after evaluating the finished candle.

What wick should I use?
CD wicks can be used as a starting point, but final wick size depends on vessel diameter, fragrance oil, fragrance percentage, dye, and burn-test results.

Why is BB-C83 so soft?
BB-C83 is formulated as a soft container wax. Its softness is one reason it is suitable for jars and tins rather than freestanding candles.

Why is my candle sweating?
Excess fragrance oil or poor fragrance compatibility can contribute to sweating. Reduce the fragrance level and re-test.

Why did I get wet spots?
Vessel temperature, cooling speed, and room conditions can affect glass adhesion.

How long should BB-C83 candles cure?
Allow candles to cool completely before testing. For scented candles, several days of cure time can be useful before evaluating final scent performance.

Do I need to burn test every fragrance?
Yes. Different fragrance oils can change wick behavior, scent performance, surface appearance, and burn characteristics.