BB-S10 Soy Container Wax Slab for Candle Making

BB-S10 is a soy-based wax made specifically for container candle applications. It comes in slab form and can be cut or broken into smaller pieces for weighing, melting, and small-batch candle production.

Use BB-S10 for glass jars, candle tins, tealights, and other suitable heat-safe candle vessels.

Like all container waxes, final candle performance depends on the complete formula, including fragrance oil, fragrance percentage, wick, vessel diameter, dye, pour conditions, room temperature, cooling conditions, and cure time.

• Soy-based wax for container candle making
• Slab form for easy portioning and weighing
• Suitable for jars, tins, and tealights
• Useful for scented or unscented container candles
• Good option for small-batch candle testing
• Available in smaller quantities for makers who do not need a full case

1. Cut or break the BB-S10 slab into smaller pieces.
2. Weigh the amount of wax needed for your batch.
3. Melt the wax slowly until completely liquid.
4. Add candle dye if desired and mix thoroughly.
5. Add fragrance oil at the temperature selected for your test formula.
6. Stir slowly and evenly until the fragrance is fully incorporated.
7. Pour into a clean, prepared heat-safe candle container.
8. Allow the candle to cool completely.
9. Allow adequate cure time before evaluating scent and burn performance.

Fragrance oils can behave very differently even when used at the same percentage. Test each fragrance individually before production.

Start conservatively with fragrance load and evaluate scent throw, surface finish, sweating, adhesion, flame behavior, and melt pool development before increasing it.

Wick selection should be based on the finished candle rather than wax type alone. Vessel diameter, fragrance oil, dye, fragrance percentage, and wick series can all change the burn.

Container preparation and cooling conditions can strongly affect the finished appearance of soy candles.

• Containers: Use clean, dry, heat-safe candle vessels.
• Cold jars: Avoid pouring into extremely cold vessels.
• Cooling: Keep candles away from strong drafts and sudden temperature changes.
• Movement: Leave candles undisturbed while they cool.
• Testing: Record temperatures and room conditions so successful batches can be repeated.

BB-S10 comes in slab form rather than loose flakes.

The slab simply needs to be cut or broken into manageable pieces before weighing and melting. The physical form does not eliminate the need for fragrance, wick, vessel, and burn testing.

Choose based on the candle performance you want rather than assuming flakes or slabs are automatically better.

BB-S10 is one of several container wax options and should be evaluated based on your own candle formula and production goals.

• BB-S10: Soy-based container wax supplied in slab form.
• Golden Wax 464 / 444: Soy container waxes supplied in flake form.
• Cargill C-3: Another soy container wax option with its own working characteristics.
• IGI 6006: Paraffin-soy blend rather than a straight soy container wax.

No wax is automatically the best choice for every fragrance and vessel. Small test batches are the fastest way to determine which formula works best.

• Rough tops: Review pour conditions, room temperature, and cooling speed.
• Wet spots or pull-away: Review vessel temperature and cooling conditions.
• Frosting: Temperature changes and cooling conditions can affect soy wax appearance.
• Weak scent throw: Test fragrance compatibility, fragrance percentage, cure time, and wick size.
• Sweating: Reduce fragrance load and confirm fragrance compatibility.
• Small flame: Re-test wick size and review fragrance and dye levels.
• Large flame: Wick down and complete another full burn test.
• Uneven burn: Check wick centering, vessel diameter, and wick selection.

Store BB-S10 in a cool, dry place away from direct sunlight, excessive heat, moisture, dust, and strong odors.

BB-S10 is supplied in slab form. During warm-weather shipping, the slab may soften slightly, stick to packaging, or develop minor surface marks.

This normally does not prevent the wax from being melted and used. Allow it to return to room temperature before cutting or weighing.

What is BB-S10 best used for?
BB-S10 is designed for container candle making, including glass jars, candle tins, tealights, and other suitable candle vessels.

Is BB-S10 a soy wax?
Yes. BB-S10 is sold as a soy-based container candle wax.

Why does BB-S10 come in a slab instead of flakes?
BB-S10 is supplied in slab form. Cut or break the wax into smaller pieces before weighing and melting.

Can I use BB-S10 for jar candles?
Yes. Jar and other container candles are its primary application.

Can I use BB-S10 in candle tins?
Yes. Use a heat-safe candle tin and test the wick with the exact vessel and fragrance formula.

Can I use BB-S10 for pillar candles?
It is not intended as a standard pillar wax. Use a dedicated pillar or mold wax when making freestanding candles.

Can I use BB-S10 for wax melts?
It is designed primarily for container candles. A dedicated wax melt or tart wax is a better starting point for clamshells, snap bars, and molded melts.

How much fragrance oil should I use?
Fragrance performance depends on the specific fragrance oil and complete candle formula. Start conservatively and increase only after testing.

What wick should I use?
Wick size depends on vessel diameter, fragrance oil, fragrance percentage, dye, and burn-test results. Do not select a wick based only on the wax name.

Why does my soy candle have frosting?
Frosting can occur naturally with soy-based waxes. Temperature changes and cooling conditions can affect how visible it becomes.

Why is my candle scent weak?
Test fragrance compatibility, fragrance percentage, cure time, wick size, and vessel diameter before simply adding more fragrance oil.

Do I need to test every fragrance?
Yes. Different fragrance oils can change surface appearance, scent performance, wick behavior, and overall burn characteristics.