BB-T30 Soy Wax for Wax Melts & Tarts

BB-T30 is a hard soy-based wax developed for wickless home-fragrance products such as wax melts, tarts, clamshells, snap bars, and molded fragrance pieces.

Its firm slab texture makes it better suited to products that need to hold their shape and release from molds than soft container candle waxes.

BB-T30 can also be tested in higher-fragrance wax melt formulas, but fragrance compatibility matters. Higher fragrance percentages can soften the wax, cause sweating, affect mold release, or create packaging problems.

This wax is not intended for regular jar candles or other wicked candles.

• Hard soy-based wax for melts and tarts
• Good choice for clamshells, snap bars, and molds
• Firm texture for better shape retention
• Good mold release when properly tested
• Suitable for higher-fragrance wax melt testing
• Can be tested for whipped wax and decorative wax pieces
• Designed for wickless fragrance applications

1. Cut or break the BB-T30 slab into smaller pieces.
2. Weigh the amount of wax needed for your batch.
3. Melt the wax completely while monitoring temperature.
4. Add dye if desired and mix until fully dissolved.
5. Add fragrance oil at your tested fragrance-add temperature.
6. Stir slowly and evenly until the fragrance is fully incorporated.
7. Pour into clamshells, tart molds, snap-bar molds, or silicone molds.
8. Allow the melts to cool completely before removing or packaging.
9. Allow adequate cure time before judging final scent performance.

BB-T30 can be tested across an approximately 8–18% fragrance range for wax melts, but the highest percentage is not automatically the best formula.

Start near the lower end and increase only if the fragrance oil remains compatible with the wax and the finished product stays firm, dry, easy to release, and stable during storage.

Very high fragrance loads can create soft melts, sweating, oily surfaces, reduced mold release, weaker packaging stability, or wasted fragrance oil.

BB-T30's harder texture makes it useful for molded melts, but cooling time and fragrance load still affect mold release and final firmness.

• Clamshells: Allow the wax to cool fully before closing the package.
• Snap bars: Wait until fully hardened before bending, snapping, or packaging.
• Silicone molds: Allow detailed pieces enough cooling time before removal.
• Small molds: Reduce fragrance load if details become too soft or break during demolding.
• Packaging: Check firmness and oil migration before long-term storage or shipping.

BB-T30 and Golden Wax 494 are both designed for wax melts and wickless fragrance products, but they are positioned differently.

• BB-T30: Harder wax with an approximately 8–18% fragrance test range for melts. Useful when firmness and higher fragrance testing are priorities.
• Golden Wax 494: Soy-based melt and tart wax typically tested in a more standard approximately 5–10% fragrance range.

BB-T30 is not automatically better because it can accept a higher fragrance percentage. The better wax is the one that gives the firmness, scent performance, mold release, and storage stability your finished product needs.

BB-T30 can also be tested for whipped wax, dessert-style wax details, and other decorative wickless pieces where a firmer wax structure is useful.

Decorative pieces usually benefit from a lower fragrance load than high-fragrance wax melts because the wax needs enough firmness to hold detailed shapes.

High-fragrance wax melt formulas are sensitive to fragrance oil type, fragrance percentage, temperature, dye, mold type, cure time, and storage conditions.

• Melts are too soft: Reduce fragrance load and allow additional cure time.
• Melts are sweating: Reduce fragrance load or test a different fragrance oil.
• Poor mold release: Allow more cooling time and test a lower fragrance percentage or different pour temperature.
• Pieces crack: Avoid very cold molds, cold rooms, and rapid cooling.
• Weak cold throw: Review fragrance compatibility, percentage, and cure time.
• Weak hot throw: Test fragrance level, cure time, melt size, and warmer type.
• Dull or uneven color: Make sure dye is fully dissolved and evenly mixed before pouring.
• Oily packaging: Reduce fragrance percentage and test longer before packaging finished melts.

Store BB-T30 in a cool, dry place away from direct sunlight, excessive heat, moisture, dust, and strong odors.

BB-T30 is supplied in hard slab form. Warm-weather shipping may cause slight softening, surface marks, or minor deformation.

This normally does not affect usability. Allow the wax to return to room temperature before cutting, weighing, or melting.

Finished high-fragrance melts should also be tested for warm-weather storage and shipping because fragrance percentage can affect firmness.

What is BB-T30 best used for?
BB-T30 is designed for wax melts, tarts, clamshells, snap bars, molded fragrance pieces, and other wickless wax products.

Is BB-T30 beginner-friendly?
Yes for basic wax melts, but higher fragrance loads require more careful testing. Beginners should start at a moderate fragrance percentage rather than immediately testing the maximum.

Is BB-T30 a soy wax?
BB-T30 is positioned as a hard soy-based tart and wax melt wax.

Can I use BB-T30 for clamshell melts?
Yes. Clamshell wax melts are one of its main applications.

Can I use BB-T30 for snap bars?
Yes. Its firm texture makes it suitable for testing snap bars and other molded wickless pieces.

Can I use BB-T30 in silicone molds?
Yes. Allow pieces to cool completely before removing detailed designs from the mold.

Can I use BB-T30 for jar candles?
No. BB-T30 is designed for wickless fragrance products, not standard wicked container candles.

Can I use BB-T30 for pillar candles?
It is not positioned as a standard pillar candle wax. Use a wax designed specifically for freestanding wicked candles when making pillars.

How is BB-T30 different from Golden Wax 494?
BB-T30 is a harder melt wax with an approximately 8–18% fragrance test range, while Golden Wax 494 is typically tested around a more standard 5–10% fragrance range.

Can I really use 18% fragrance oil?
It can be tested for compatible wax melt formulas, but 18% should not be treated as a target. Too much fragrance can soften the wax, cause sweating, reduce mold release, and create packaging problems.

Does more fragrance oil mean stronger scent throw?
No. Fragrance compatibility, cure time, melt size, warmer type, and the overall formula all affect scent performance.

Can I use BB-T30 for whipped wax?
Yes, it can be tested for whipped or decorative wax pieces. Lower fragrance percentages are generally a better starting point when the finished piece needs to hold a detailed shape.

Why are my melts sweating?
Sweating is commonly associated with high fragrance load, fragrance incompatibility, warm storage, or insufficient cure time.

Why are my wax melts too soft?
High fragrance load, warm temperatures, or insufficient cooling and cure time can all reduce firmness.

Why are my melts difficult to remove from the mold?
Make sure the wax is fully cooled. Fragrance percentage, mold temperature, and pour temperature can also affect release.

How long should BB-T30 melts cure?
Allow at least 3 days before judging fragrance performance. Some fragrance oils may improve with additional cure time.

Do I need to test every fragrance oil?
Yes. Different fragrance oils can affect firmness, sweating, mold release, color, and scent performance even at the same percentage.