IGI 6006 Paraffin/Soy Container Wax

IGI 6006 is a paraffin-soy blend made specifically for container candles. It is popular with candle makers who want strong fragrance performance, smoother tops, good jar adhesion, and easier handling than many pure soy waxes.

The wax has a soft slab texture and produces an opaque to semi-gloss finished appearance. It can work well for jars, tins, and tealights when paired with the correct fragrance oil, wick, and vessel.

Final results depend on the complete candle system, including fragrance oil, wick, dye, container diameter, room temperature, cooling conditions, and cure time.

• Paraffin-soy blend designed for container candles
• Good choice for jars, tins, and tealights
• Strong hot throw potential
• Smooth opaque to semi-gloss appearance
• Low shrinkage compared with many straight waxes
• Often easier to work with than many pure soy container waxes
• Can produce good single-pour results when properly tested

1. Cut or break the soft slab into smaller pieces if needed.
2. Weigh the amount of IGI 6006 needed for your batch.
3. Melt the wax until completely liquid.
4. Add fragrance oil at your tested fragrance-add temperature.
5. Stir slowly and evenly for approximately 1–2 minutes.
6. Add candle dye if desired and mix thoroughly.
7. Pour into a clean, prepared jar, tin, or tealight cup.
8. Allow the candle to cool completely before evaluating the surface and beginning burn testing.

A common fragrance load range for IGI 6006 is approximately 6–10%. This wax is known for strong fragrance performance, but using more fragrance oil does not automatically produce a stronger candle.

Excess fragrance can contribute to sweating, poor combustion, unstable flames, surface problems, or wick performance issues.

CD and ECO wick series are common starting points for IGI 6006, but final wick size depends on the container diameter, fragrance oil, fragrance percentage, dye, and complete candle formula.

IGI 6006 is generally easier to work with than many pure soy waxes, but vessel temperature, pour temperature, and cooling conditions can still affect the finished candle.

• Containers: Use clean, dry, heat-safe candle vessels.
• Jar temperature: Slight warming may help when working in cold conditions.
• Pour temperature: Test within approximately 160–180°F and adjust based on your formula.
• Cooling: Avoid strong drafts and sudden temperature changes.
• Batch notes: Record fragrance percentage, pour temperature, wick, and room conditions for repeatable results.

IGI 6006 is not a pure soy wax. It is a paraffin-soy blend and should be described that way.

• IGI 6006: Often chosen for stronger hot throw, smoother tops, and easier single-pour performance.
• Pure soy container wax: Better suited to makers whose product positioning specifically requires a soy-based wax without paraffin.

Neither type is automatically better. The better choice depends on your brand positioning, fragrance goals, appearance preferences, and burn-test results.

IGI 6006 is relatively forgiving, but surface dips, wet spots, sweating, weak scent throw, and wick problems can still occur when fragrance load, temperature, or wick selection is not well matched.

• Surface dip: Test a slightly warmer pour or use a heat gun for minor surface correction.
• Wet spots: Check jar temperature and avoid very fast cooling.
• Sweating: Reduce fragrance load or test a different fragrance oil.
• Weak scent throw: Re-test fragrance compatibility, fragrance percentage, cure time, and wick size.
• Large flame: Test a smaller wick and review fragrance load.
• Small flame: Test a larger wick or reduce fragrance load if the candle is struggling to burn correctly.
• Uneven burn: Check wick centering, vessel diameter, and wick selection.

Store IGI 6006 in a cool, dry place away from direct sunlight, excessive heat, moisture, dust, and strong odors.

IGI 6006 is a soft slab wax and may soften, deform, or stick together during warm-weather shipping. This normally does not affect usability.

Allow the wax to return to room temperature before cutting, weighing, or melting.

What is IGI 6006 best used for?
IGI 6006 is designed for container candles, including glass jars, candle tins, and tealights.

Is IGI 6006 beginner-friendly?
Yes. It is often easier to work with than many pure soy waxes, but fragrance, wick, and burn testing are still required.

Is IGI 6006 a soy wax?
No. IGI 6006 is a paraffin-soy blend. It contains soy but should not be marketed as a pure soy wax.

Can I use IGI 6006 for jar candles?
Yes. Jar candles are one of the primary applications for this wax.

Can I use IGI 6006 in candle tins?
Yes. It can be used in suitable candle tins with the correct wick and complete burn testing.

Is IGI 6006 better than Golden Wax 464?
Not automatically. IGI 6006 is often chosen for stronger hot throw and smoother surfaces, while Golden Wax 464 is a soy container wax. Choose based on your brand positioning and finished candle performance.

Is IGI 6006 a single-pour wax?
It can produce good single-pour results, but this is not guaranteed. Large vessels, heavy fragrance loads, low room temperatures, or fast cooling can still create dips or surface issues.

Can I use IGI 6006 for pillar candles?
No. IGI 6006 is a soft container wax. For freestanding pillars and molded candles, use a wax designed for those applications.

Can I use IGI 6006 for wax melts?
It is primarily designed for container candles. For clamshells, snap bars, and solid melts, a dedicated wax melt or tart wax is generally a better choice.

How much fragrance oil can I use?
A common testing range is approximately 6–10% by wax weight. Final performance depends on the specific fragrance oil, wick, vessel, and formula.

What wick should I use with IGI 6006?
CD and ECO wick series are common starting points. Final wick size depends on vessel diameter, fragrance oil, fragrance percentage, dye, and burn-test results.

Why is my IGI 6006 candle sweating?
Sweating can occur when the fragrance load is too high or the fragrance oil does not perform well in the formula. Reduce the fragrance percentage and re-test.

Why does my candle have a surface dip?
Surface dips can be affected by pour temperature, container size, room temperature, and cooling speed. Test small temperature adjustments and slower cooling.

Why does my candle have wet spots?
Wet spots are commonly related to wax shrinkage, container temperature, and cooling conditions. They are often cosmetic.

How long should IGI 6006 candles cure?
Many makers evaluate IGI 6006 after several days of curing. Fragrance performance may continue to change depending on the fragrance oil and formula.

Does more fragrance oil give stronger scent throw?
Not necessarily. Too much fragrance can cause sweating, poor burning, or wick problems. Fragrance compatibility and wick selection are also important.

Do I need to burn test every fragrance?
Yes. Different fragrance oils can change wick and burn behavior even when the wax and container remain the same.